banner



how to install t molding

Skip to content
Versatrim T-Molding Installation Bestlaminate 2016-11-28T15:27:30-05:00

Versatrim T-Molding Installation

Have a room transition with same height floors? You can use a T-Molding to transition from floor to floor. This is a molding shaped like a T that sits between the floors for a seamlessss transition floor to floor. It is also recommended to use a T-Molding if you have more than 30′ of consecutive flooring installed.

T-Molding(3)

Installation for 6 – 9.5 mm Floors using Versatrim U-Track

6 – 9.5 mm Floors: Use Versatrack (Metal Track)

Step 1:Install the flooring planks including the underlayment by leaving a 1″ inch (25mm) gap for the installation of the T-molding.

Step 2: Gather tools needed. Click here to find out which tools you'll need for your installation.

Step 3: Sweep and clean your new laminate to remove dust and any scraps that may be in the expansion gap or around the edge of the flooring.

Step 4:Center the U-Track between the two laminate floors and screw it to the sub floor by using #4 x 3/4″ screws.

Step 5: Gently press the molding into the track starting from one end to the other just like you would close a Zip-Lock bag. Do not try to push the entire molding in all at once by just pressing it in from top!

Installation for 9.5 – 12.3 mm Floors using Versatrim U-Track and Shim

9.5 – 12.3 mm Floors: Use Versatrack & Versatrack Shim. Use the same molding & track, just add 1 Versatrack Shim.

Step 1:Install the flooring planks including the underlayment by leaving a 1″ inch (25mm) gap for the installation of the T-molding.

Step 2: Gather tools needed. Click here to find out which tools you'll need for your installation.

Step 3: Sweep and clean your new laminate to remove dust and any scraps that may be in the expansion gap or around the edge of the flooring.

Step 4:Center the U-Track and Shim between the two laminate floors and screw them to the sub floor by using #4 x 5/8″ screws.

Step 5: Gently press the molding into the track starting from one end to the other just like you would close a Zip-Lock bag. Do not try to push the entire molding in all at once by just pressing it in from top.

Video Guide

Want To Learn More?

how to install t molding

Source: https://www.bestlaminate.com/help/versatrim-t-molding-installation/

Posted by: worthymands2002.blogspot.com

0 Response to "how to install t molding"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel